M22
Product Image
M22
Product Introduction
M22 uses a web guide control system with two sensors and two actuators to independently position both edges of a moving web. It is designed to monitor and measure material width on industrial web handling lines.
Key Features
- Supports infrared sensors for woven fabric, nonwoven fabric and breathable materials; supports ultrasonic sensors for plastic film, copper/aluminum foil and transparent materials.
- Typical width measurement range is 100-2000 mm; custom sizes are available.
- Width measurement accuracy is +/-0.2 mm.
- Alarm output when measured material width is above or below the set width, with buzzer and relay output.
- Supports Modbus RTU communication.
Technical Parameters
Model
M22
Product Type
Width measurement web guide controller
Controller Supply Voltage
DC 24-45 V, standard 24 V
Analog Sampling Resolution
12-bit ADC
Supported Sensor Types
Ultrasonic sensor, photoelectric sensor
Material Tracking Response Time
0.5 ms
HMI
TFT
Protection Rating
IP53
Motor Drive Capacity
DC 24-45 V, 10 A Max
Motor Driver Supply Voltage
DC 5 V, 200 mA Max
Driver Speed
1-60 mm/s adjustable
Sensor Supply Voltage
DC 5 V
Sensor Analog Output
0-5 V